- Silicone Water Repellent
- Personal Care
- Agricultural Adjuvant
- Textile Auxiliaries
- Pump Oils
- Silane Coupling Agent
- Silicone Foam Stabilizer
- Silicone Fluids
- Specialty silicone fluids
- General purpose silicone fluids
- Silicone Surfactant
- Silicone Sealant
- Silane Crosslinking Agent
- PFPE Oils
- Silicone Rubber
- Silicone Additive
- Silicone Antifoam
- Silicone Intermediate
- CAS Index
Silicone Agricultural Adjuvant RJ-7033※MSDS Download Be Without TDS Download Inquiry
Molecular formula: C10H28O3Si3(C2H4O)n
CAS No.: 67674-67-3
Chemical name: Polyether modified silicone fluid; Polyether modified siloxane
Equivalent Brand: Momentive Silwet 408
More than 95% of our clients are quite satisified by using RJ-7033 to replace Silwet 408
Silicone Agricultural Adjuvant RJ-7033(Nonionic silicone surfactant for agriculture) is trisiloxane modified silicone surfactant. It's a generally used silicone spreader, with it's super spreadability and penetrability, can be used as spray adjuvant with agrochemicals to improve their performance.
This super-spreader could decrease the surface tension of liquid fiercely, making them wet the foliar surface quickly and compeletely. RJ-7033 is also particularly effective in preventing ingredient from being washed by rain(rainfast).
1. Wetting effect
|Appearance||Colourless to amber clear liquid|
|Surface tension(0.1%)||21.5mN/m MAX|
|Cloud point(1% in water solution)||10°C MAX|
|Dissolution||Dissolve in water|
Note of Use
RJ-7033 can be used as a component of 0.5~8% in agrochemical formulations. Proposing of formulations pH value is 6~8. Users should adjust the usage of nonionic silicone surfactant according to different varieties and condition, in order to achieve the most cost-effective results. Prior to the use, compatibility testing and pilot ladder testing should be done.
As a tank mix additives, wetting agent RJ-7033 can improve spray coverage, promote absorption, and reduce the amount of spray. If the spray mixture PH is 5-8, and used within 24 hours after preparation, this silicone surfactant would act well.
Usually we add 0.025% -0.1% silicone surfactant in the low spray volume to achieve sufficient coverage.
The typical usage is as follows:
|Usage of silicone surfactant RJ-7033||Volume|
|Plant Growth Regulator||0.025-0.05%|
|Fertilizers and trace elements||0.015-0.1%|
Video 1: RJ-7033 foliar wetting experiment
RJ-7033 is available in 200kg plastic drums, 1000kg IBC drums or other packing on request.
Transport as non-hazardous chemicals. Store in original container only.
Keep container tightly closed and store in cool, well ventilated place.
Shelf life: 1 years.
|Spreading||Penetrating ||Foam Decay||CAS No.||Features|
Wide PH application range(4-8)
|RJ-7183||●●●||●●||-||17955-88-3||Oil based silicone surfactant|