- Silicone Water Repellent
- Personal Care
- Agricultural Adjuvant
- Textile Auxiliaries
- Pump Oils
- Silane Coupling Agent
- Silicone Foam Stabilizer
- Silicone Fluids
- Silicone Sealant
- Industrial Silicone Sealant
- Construction Silicone Sealant
- Silane Crosslinking Agent
- PFPE Oils
- Silicone Rubber
- Silicone Additive
- Silicone Antifoam
- Silicone Intermediate
- CAS Index
General Purpose Silicone Sealant Of Acid Type RJ-M600※MSDS Download Be Without TDS Download Inquiry
The general purpose silicone sealant of acid type RJ-M600 is a kind of environment-friendly product designed for one component and acid curing, which is designed for glass decoration and decoration. This product can be easily extruded under wide temperature conditions, and can be solidified into excellent and durable elastic silicone rubber based on moisture in the air.
v One component, curing at acidic room temperature, good construction performance
v High bonding strength and fast curing speed
v Excellent thixotropy, unseasonally restricted
Sealing of indoor glass decoration and other uses.
|Tack free time/h||≤3||0.15-0.25|
|Tensile strength/MPa, 23℃||＞0.4||＞0.4|
|Tensile strength/MPa, -20℃||＞0.6|
Physical data in the above table is for reference only.
v Not be used on basic materials such as marble and granite.
v Not suitable for all materials that will exudate grease, plasticizers or solvents.
v Not suitable for enclosed space or direct contact with food surface.
v Substrate surface temperature below 5℃ or over 40℃ is not suitable for construction.
Operation and safety
v The workplace should always be well ventilated;
v The uncured sealant should not contact the eyes. If contact occurs, please flush with water and contact the doctor.
v Please avoid prolonged contact with the skin, which may cause itching;
v Keep out of reach of children.
300ML plastic hose, 200L iron drum or different packing available.
Belong to the non-dangerous goods, please stored in a cool and dry place under 27 ℃.