- Silicone Water Repellent
- Personal Care
- Silicone Elastomer Suspension
- Silicone Emulsion
- Volatile Silicone Fluid
- Cosmetic Silicone Fluids
- Silicone Fluid Compounds
- Silicone Elastomer Blend
- RJS-9040 Silicone Elastomer Blend
- RJS-9041 Silicone Elastomer Blend
- RJS-9046 Silicone Elastomer Blend
- RJS-9045 Silicone Elastomer Blend
- RJS-9070 Silicone Elastomer Blend
- RJS-9080 Silicone Elastomer Blend
- RJS-9082 Silicone Elastomer Blend
- Silicone Resin Blend
- Agricultural Adjuvant
- Textile Auxiliaries
- Silane Coupling Agent
- Silicone Fluids
- Silane Crosslinking Agent
- PFPE Oils
- Silicone Rubber
- Silicone Intermediate
- CAS Index
RJS-9046 Silicone Elastomer BlendBe Without MSDS Download Be Without TDS Download
INCI:Cyclopentasiloxane (and) Dimethicone/vinyldimethicone Crosspolymer (and)Dimethiconol
RJS-9046 can be dispersed in oil phase rather than dissolves in it.
The product may be formulated into w/o emulsions, water-in-silicone oil, and water-in-oil emulsions and anhydrous products to provide dry smoothness and a light silky skin, non-greasy feel.
Long time deposit may lead to condensation, yet under shear force, the product will become dilution, it is not an issue of the quality.
Colorless to yellowish, Transparent to translucent gel
|Refractive index (25℃)||1.3950-1.4050|
Viscosity (CS, 25℃)
v Cross-linked silicone elastomer gel
v Act as a thickener in W/O systems
v Slight sebum absorbing
v Room temperature processing
v Reduce the stickiness properties of the formula
v Silky, smoothing touch
v Facial functions
RJS-9046 may be used in skin care, hair care, and other potential formulations, such as sun care, color cosmetics, and styling aid, etc.
RJS-9046 could be dispersed into the oil-phase, stir to homogeneous without shearing process.
It may be added to the oil phase or silicone phase in an emulsion formulation; it is strongly recommended that the oil phase is stir to homogeneous state and then slowly add in RJS-9046.
It can be post-added to emulsions provided the emulsion is viscous enough for the products to be dispersed.
When heat is used, the material should be processed in an enclosed vessel to prevent the cylcopentasiloxane from volatilizing.
The recommended processing temperature should not exceed 60℃, and the heating time could not be long.
The suggested usage level is 1-20%.
Packing & Storage
RJS-9046 is supplied in 20kg pails, 200kg iron drums.Samples are available upon request in bottles.Prevent from the exposure of moisture, acids, alkalis, and other impurities.
shelf life:2 yearsInquiry