- Silicone Water Repellent
- Personal Care
- Agricultural Adjuvant
- Textile Auxiliaries
- Pump Oils
- Silane Coupling Agent
- Silicone Fluids
- Silicone Sealant
- Industrial Silicone Sealant
- Flange Silicone Sealant RJ-M8910
- Flange Silicone Sealant RJ-M8900
- Two-component Silicone sealant for Automotive Lamp RJ-M8200AB
- General Purpose Silicone Sealant RJ-M820
- Silicone Sealant For Slar Photovoltaic Assembled Parts RJ-M811/821
- Two-component Silicone Potting Sealant RJ-M8000
- PUR for Automotive Lamp RJ-PUR
- Construction Silicone Sealant
- Silane Crosslinking Agent
- PFPE Oils
- Silicone Rubber
- Silicone Additive
- Silicone Antifoam
- Silicone Intermediate
- Silicone Release Agent
- CAS Index
Flange Silicone Sealant RJ-M8900Be Without MSDS Download Be Without TDS Download Inquiry
This silicone sealant is specially used for plane sealing in automotive and marine industry, designed of single component, neutral curing with high-performance. The product can replace kinds of rubber pad, cork pad cardboard pad, and seal the flange joint surfaces of automobile, motorcycle and kinds of mechanical equipment engine, gear box and ect al. After curing, the elastomer has excellent temperature resistance, oil resistance, corrosion resistance, adhesive performance and shock resistance.
Properties and Features
1, Excellent weather resistance, ozone resistance, fuel resistance, moisture resistance;
2, Excellent heat and cold resistance, ensure mechanical equipments for sustainable work from -50℃-250℃;
3, No corrosion to the substrate.
4. Excellent resistance to automotive engine oils.
|Specific gravity, g/cm3||1.34±0.1|
|Tack-Free Time, min||5~35|
|Durometer hardness, A||30～50|
|Tensile strength, MPa||≥1.5|
|Elongation at Break, %||≥250|
|working temp, ℃||-50～250|
Change rate of Tensile strength
Change rate of Elongation at Break
Physical data in the above table is for reference only.
It is used for sealing of mechanical equipment engine, gear box and other plane flange joint surfaces in automotive and marine industry.
Operation and safety
Remove the oil and dust, keep the surface dry and clean.
Apply the glue to the adhesive surface and make a continuous rubber ring.
The uncured sealant should not contact the eyes. If contact occurs, please flush with water and contact the doctor;
Do not put this sealant into use immediately after it is applied. After self-curing and complete (≥ 24h), elastic anti-seismic sealing gasket is formed.
Keep out of reach of children.
Avoid direct contacting with the surface of the food.
300ML plastic hose, 50ml in aluminum toothpaste pipe, 200L iron drum or Different Packing Available.
Belong to the non-dangerous goods, please stored in a cool and dry place under 27℃.